《USB2.0_PCB_Layout》.pdfVIP

High-speed USB PCB Layout Recommendations Introduction High-speed USB operates at 480 Mbps with 400-mV signaling. For backwards compatibility, devices that are high-speed capable must also be able to communicate with existing full-speed USB products at 12 Mbps with 3.3V signaling. High-speed USB hubs are also required to talk to low-speed products at 1.5 Mbps. Designing printed circuit boards (PCBs) that meet these requirements can be challenging. High-speed USB is defined in the Universal Serial Bus Specification Revision 2.0, located at . The or