《92_How to install OpenRemote on QNAP Turbo NAS》.docx

How to install OpenRemote on QNAP Turbo NAS OpenRemote is a software integration platform for residential and commercial building automation. OpenRemote running on the QNAP Turbo NAS (hereinafter referred to as the “Turbo NAS” or the “NAS”) offers the best automation solution that fits everywhere, at home, in the office, or used in large-scale projects. OpenRemote for the Turbo NAS consists of two main components: 1. OpenRemote controller is the central piece at the back end to connect the home automation devices. 2. OpenRemote designer is a platform for users to design the user interface on the front end to control and monitor their devices. This tutorial will guide you through the following steps: 1.? HYPERLINK .tw/i/en/trade_teach/con_show.php?op=showonecid=92 \l A Install the OpenRemote controller on the Turbo NAS (via App Center) 2.? HYPERLINK .tw/i/en/trade_teach/con_show.php?op=showonecid=92 \l B Integrate your first Z-Wave device by OpenRemote designer 3.? HYPERLINK .tw/i/en/trade_teach/con_show.php?op=showonecid=92 \l C Design and deploy your user interface for smartphones, tablets, or web browsers 4.? HYPERLINK .tw/i/en/trade_teach/con_show.php?op=showonecid=92 \l D Integrate more devices and protocols of your choice For the online tutorials of installing OpenRemote on the Turbo NAS, please see “ HYPERLINK /display/docs/OpenRemote+2.0+How+To+-+Controller+on+QNAP+NAS \t _blank Install OpenRemote on QNAP NAS”. 1. Install the OpenRemote controller on the Turbo NAS (via App Center) The Java Runtime Environment (JRE) is required for OpenRemote. Before installing the OpenRemote controller, please follow the steps below to install the JRE on the Turbo NAS. a. Install Java Runtime Environment (JRE) Note:?The JRE is only available as a ready-made installable tool for the x86-based Turbo NAS models (TS-x39, TS-x59, TS-509, TS-809, TS-809U-RP, SS-x39, TS-x59 Pro+, TS-x59 Pro II, and TS-x79 series). For ARM-based Turbo NAS models, please refer to the?