《Signal_and_system_test_paper_2005_B》.docVIP

Signal and System Test Paper B For Electrical Engineering Department 2003 (Academic Year 2005-2006 First Team) Student ID:__________ Name:___________ PART 1 CHOOSING THE BEST ANSWER (30%) The following signals are shown below, the ______is aperiodic signal. x(t)=sintU(t) x[n]=cos[(Π/3)n]+cos[(Π/4)n] x[n]=ej(π/4)n Suppose x(t)={t t1≤t﹤t2 ； and 1 t≥t2}.The signal x(t) can be expressed in the form _______. x(t)=t[u(t-t1)- u(t-t2)]+[u(t-t1)- u(t-t2)] x(t)=t[u(t-t1)- u(t-t2)]+u(t-t2) x(t)=(t + 1)[u(t-t1)- u(t-t2)] Given a linear time-invariant (LTI)system with no initial conditions, when input x(t)=cos4t the responds is y(t)=0.5cos(4t-Π/6). Then the response to the input x(t)=4cos4t+2cos(4t-8) is_______ . 2cos(4t-Π/6)+cos(4t- Π/6) 2cos(4t-Π/6)+cos(4(t-2)- Π/6) 0.5cos(4t-Π/6) +2cos(4(t-2)- Π/6) The input/output relationship of the discrete-time system is given by y[n]=x[n]u[n]. The system is ________. nonlinear and time-varying system linear and time-invariant system linear and time-varying system The system has a unit step response g(t)=(1-e-t)u(t), the unit impulse response h(t) is ________. h(t)= e-tu(t) h(t)= y(t)-y(t-1) h(t)= e-tu(t)+δ(t) The input/output relationship of the continuous-time LTI system is y’’(t) + y’(t) - 2y(t) = x(t).The system transfer function H(s) is ______. 2/(s2+s+1) 1/(s-2)(s+1) 1/(s2+s-2) Given a bandlimited signal x(t), the Nyquist sampling frequency is ωs, then the Nyquist sampling frequency of the signal 2x2(t)+x(t) is ______. ωs 2ωs 3ωs The frequency response function of the LTI system is given by H(ω)=e-jω/3 for│ω│≤5, input signal x(t)= 5+3cos(3t-п/6) -12cos(12t-∏/4), The output response y(t) resulting from the x(t) is given by 5+3cos(3t-п/6)-12cos(12t-∏/4) 5+3cos(3t-п/6) 5+3cos(3t-п/6-1) A causal stable LTI system has only one pole p=-1,input signal is x(t)=(sin2t)u(t), the possible response result from x(t) is _______. y(t)=Ae-tu(t)+Bcos(2t-φ) y(t)=(Ae-2t+ Be-t)u(t) y(t)=(Ae-t+Bcos(2t-φ))u(t) 10、For a st