《电容式电压互感器分析》.pdfVIP

1 Analysis of Capacitive Voltage Transformer Transients with Wind Farm Integration Viraj Pradeep Mahadanaarachchi, Student Member, IEEE, and Rama Ramakumar, Life Fellow, IEEE Abstract—Wind energy has gained much attention with the Rf Loading resistance of the suppression circuit development of conversion technologies, concerns on fossil fuel Cf Capacitance of the suppression circuit use and associated environmental impacts. As a result, an Zb Resistive burden increasing number of large wind farms are coming into the power system at high voltage (HV) grid level. Voltage transformers (VT) are used for obtaining secondary voltages II. INTRODUCTION suitable for metering and protection devices in a wind farm at NCREASING Wind energy’s contribution to electricity collector feeders, medium voltage bus and HV side of the main Isupply has garnered to much attention throughout the step-up transformer(s). Capacitive Voltage Transformers (CVT) are preferred at HV level over the conventional electromagnetic world. The US department of Energy envisages 20% of VTs. In large wind farms, CVTs are installed on the HV side of electric installed capacity from wind power by 2030 [1]. the step-up transformer. However, during line faults, due to the Developments in variable speed operation, power electronic collapse of primary voltage, CVT will dissipate its stored energy interfaces and induction machines have made the use of large in stack cap