《110w 开关电源设计全过程》.pdfVIP

 Order this document SEMICONDUCTOR APPLICATION NOTE by AN1669/D    !# ##!  $ %!$ %!%% by Joël Turchi Power Management Products Operation Application Laboratory, Motorola, Toulouse, France The purpose of this application note is to present a way of The outputs: 120 V 0.5 A designing the MC44603 in a fly–back dedicated to a 110 W 28 V 1.0 A output power supply in two distinct cases: 110 Vrms mains 15 V 1.0 A and 220 Vrms mains. For this range of power, the discontinuous mode must be 8 V 1.0 A chosen as it limits the stress on the power switch and the out- put diodes. This kind of working can be guaranteed, thanks to Consequences for the Transformer the demagnetization arrangement of the MC44603. This output voltage values are obtained using four second- This application note considers both high and low mains ary windings of the transformer. Now, as a diode is located voltages. between the output capacitor and the winding, this diode volt- — In the high voltage a.c. line case, it deals with both age must be taken into account in the choice of the number of MOSFET and BIPOLAR transistor use. turns of each of the windings.