连接管件内径滚压连接三维有限元分析.pdfVIP

doi：10．3969／j．issrl．1007—2012．2011．04．017 内径滚压连接三维有限元分析* (北京航空制造工程研究所，北京100024)张荣霞 吴 为 曾元松 摘要：通过对成形过程中关键问题的合理处理，建立了钛合金导管内径滚压连接成形，利用ABAQUS／Dynamic Explicit算法进行模拟计算，真实地反映了物理试验中各组件的运动情况；探讨导管材料翅性变形特点、成形后位移场 分布，以及导管与管套之间接触力随时间的变化规律，从而掌握r滚压连接成形特点，模拟结果与试验吻合较好。综 合分析得出，导管材料嵌入管套凹槽形成拉脱阻力和导管与管套之间存在残余接触压力，是连接成形的机理。 关键词：钛合金；内径滚压；三维有限元 中图分类号：TGl46 文献标识码：A‘ 文章编号：1007—2012(2011)04—0085—05 Thethree-dimensionalfiniteelement analysis ontheinternal connection rolling ZHANG WUWeiZENG Rong-xia Yuan-song Aeronautical Research 100024 Manufacturing China) (Beijing TechnologyInstitute，Beijing titanium wasestablished．Thecalculationmethod Abstract：The3DFEMmodeloftheinternal connectionof tubes rolling alloy USedwas characteristicofthe inthe was ABAQUS／DynamicExplicitalgorithm．Themoving parts physicalexperimentactually reflected．Thecharacteristicofthematerialin distributionofthe field，andthevariationruleof plasticforming，the displacement the betweenthetubeandsleeveversustimewerediscussedtOholdthe featureofinternal connection． contactforoe forming rolling well withthatof thatthe resistanceforceformed Thesimulationresults tesL shows agree physicalSyntheticanalysis pull-apart duetOtubematerialembedsintothesleeve andtheresidualcontactforceexistedbetweenthetUbeandthesleevereveal grooves themechanicsoftheinternal connection． rolling