高压电缆接头论文高压电缆接头局部放电检测方法.docVIP

高压电缆接头论文：高压电缆接头局部放电检测方法 【中文摘要】高压电缆是电力系统重要组成部分之一,对其进行局部放电在线检测是保障电力电缆可靠运行的重要手段,具有非常重要的意义。本文在对高压电缆接头局部放电检测的研究中,首先对电力电缆的线路模型研究,确定了能够表征脉冲信号的参数。进而通过建立电力电缆模型,对局部放电信号在高压电缆中的传播特性进行了仿真研究,得到局部放电脉冲信号在电力电缆中的传播规律。然后,本文设计并研制了针对高压电缆接头局部放电特点的宽频带电流传感器,确定了最优的参数,使电流传感器具有较宽的工作频带和良好的幅频特性,并对所研制的宽频带电流传感器进行了标定测试和现场的安装。接下来本文对超声波检测局部放电技术进行了研究。通过对超声波检测局部放电原理的研究,选择适合测量高压电缆局部放电的超声波检测系统。最后,针对造成电力电缆绝缘故障的主要原因,本文模拟了电缆附件故障,设计并制作了4种典型的放电模型。在实验室条件下,搭建局部放电实验的实验平台,采用宽频带电流传感器联合超声波传感器这一系统依次对这4种放电模型进行局部放电的测量,验证检测系统的有效性,并实现对高压电缆接头局部放电的在线检测和模式识别。 【英文摘要】The high voltge cable is one of the important parts in power system. Giving on-line PD detection to the high voltge cable is the important and meaningful way to ensure the high voltge cable reliable operation. On the research of the PD detection of the high voltge cable joint, the paper reserches the line model of the power cable and identifies the parameters which can characterize the pulse. By establishing the model of the power cable, the paper gives a simulation study on the PD signal propagation characteristics in the high voltge cable and researches the propagation of the pulse signal in cable. Then the paper designs and makes the wideband current sensor which is aiming at the PD characteristic of the high voltge cable joint and determines the optimal parameters of the wideband current sensor, which makes the wideband current sensor have wide workband and better amplitude-frequency characteristics. Therefore, the paper gives a test to the amplitude-frequency characteristics of the wideband current sensor.The paper studies the ultersound measurement technology on PD detection. Through the research on the principle of the ultersound detection to the PD, the paper chooses the appropriate ultersound detection system, which is suit for the PD of the high voltge cable. At last, to the reasons of the power cable Insulation fault, the paper simulates the fault of the cable joint and designs 4 typical discharge models. Under laboratory conditions, the paper builds