一种基于单片机控制的新型光伏电池毕业论文外文翻译申.docVIP

附录A Microprocessor-Controlled New Class of Optimal Battery Chargers for Photovoltaic Applications Abstract A simple, fast and reliable technique for charging batteries by solar arrays is proposed. The operating point of a battery is carefully for cednear the maximum power point of solar cells under all environmental (e.g., insolation, temperature, degradation) conditions. Optimal operation of solar arrays is achieved using the Voltage-Based Maximum Power Point Tracking (VMPPT) technique and the charger operating point is continuously adjusted by changing the charging current. An optimal solar battery charger is designed, simulated and constructed. Experimental and the oretical results are presented and analyzed. The main advantages of the proposed solar battery charger as compared with conventional ones are shorter charge time and lower cost. Index Terms—Charger, microprocessor, maximum power point tracking (MPPT), photovoltaic. I.INTRODUCTION The field of photovoltaic systems is quite broad with many stand-alone and grid-connected configurations. Applications of solar energy include water pumping , refrigeration and vaccine storage, air conditioning, light sources, electric vehicles ,PV power plants ,hybrid systems , military and space applications. Reference[8]has divided photovoltaic applications into four categories: large-scale grid connected systems, small remote photovoltaic plants, low power stand-alone systems, and a combination of solar systems with other alternative energy sources. These categories may also be viewed in terms of load characteristics. There are three load types:a DC load, a “dead” AC load, and a “live” AC load(e.g.,a utility system).Most of these applications use batteries as backup energy systems and/or matchingdevices for balancing their energy flow during peak load or poor environmental conditions (e.g., low insolation, high temperature or high degradation).The main drawbacks of PV systems are high fabrication cost, low energy conver