CATIA三维公差及标注模块.ppt

Copyright DASSAULT SYSTEMES 2002 3D Functional Tolerancing Annotation Course Presentation Objectives of the course In this course you will learn how to define Functional Tolerances and Annotation to geometric parts designed in 3D Wireframe or Solid geometry Targeted audience Catia V5 users Prerequisites Fundamentals about Catia V5 Table of Contents Introduction to FTA Workbench p.4 The User Settings p.5 Accessing the Workbench p.9 The User Interface p.12 General Process p.15 Fundamentals of FTA p.16 Creating Annotation planes p.17 Creating Annotations p.25 Power Copy Integration p.41 Use Properties p.43 Generate Check Report p.61 The 2D extraction p.63 View from 3D p.64 To Sum Up… p.66 Introduction to FTA Workbench You will become familiar with the Functional Tolerancing Annotation Workbench by : The User Settings Accessing the Workbench The User Interface General Process The User Settings (1/4) The User Settings (2/4) The User Settings (3/4) The User Settings (4/4) Accessing the Workbench (1/3) Accessing the Workbench (2/3) Accessing the Workbench (3/3) The User Interface (1/3) The User Interface (2/3) The User Interface (3/3) General Process Fundamentals of FTA You will become familiar with the fundamental functions of the Functional Tolerancing Annotation Workbench. Creating Annotation Planes Creating Annotations Use Properties Generate Check Report Creating Annotation Planes (1/8) Projection View This specific annotation plane allows you to manage 3D annotations: Located in planes both parallel to this annotation plane and in the background and foreground spaces bounded by this annotation plane (or in any plane of the direction of planes defined by this annotation plane), Related to the geometry finding an intersection with this annotation plane, Lying on / belonging to this annotation plane. Projection View Annotation Planes can be created on a planar face or on a plane. This option allow