D7D5_NY_ENG.pdfVIP

Atlas Copco Surface Drill rig ROC D5 for 35 mm – 89 mm hole range ROC D7 for 64 mm – 115 mm hole range Full radio remote controlled drill rigs exceptionally maneuverable in the roughest terrain. Radio Remote Control enhances operator safety and increases production Atlas Copco full radio remote controlled D series non-cab drill rigs are exceptio- nally stabile making them versatile and productive in all types of terrain. The boom anchor point is located on the middle of the rig frame to keep the center of gravity low and yet provide good ground clearance. Designed to meet the toughest conditions Atlas Cop- co ROC D5 and ROC D7 are equipped with a Caterpillar diesel engine, high capacity Atlas Copco compressor and a powerful COP rock drill. By placing the boom anchor point low and to the center of the rig frame, reach and coverage area are excellent. Atlas Copco hole quality Every component in the rig has been Versatile boom system Atlas Copco has used the latest techni- designed to provide optimum hole qua- Atlas Copco’s unique heavy duty tubular cal innovations to build rugged, versati- lity. The highly efficient diesel engine, folding boom provides excellent reach le drill rigs that combined low operating boom anchor point, double drillsteel and coverage. More holes can be drilled costs with high productivity. guide and cylinder feed all contribute to from each set-up. Less moving means higher penetration rates, straighter and higher productivity, especially in rough better quality holes and greater produc- difficult terrain.