新液压与气压传动英汉双语 教学课件 陈淑梅第9章 Chapter_9.pptVIP

Chapter 9 Design of Hydraulic Transmission System 9.1 The Approach for Hydrostatic Circuits Design 9.2 A Design Example of Hydraulic System 9.1 The Approach for Design of Hydrostatic systems 9.1.1 Determination of designed requirements 9.1.2 Analysis for working conditions and determination of main parameters 9.1.3 The determination of hydraulic system diagram 9.1.4 Hydraulic components calculation and selection 9.1.5 Performance check for a hydraulic system designed 9.1.6 Drawing of working diagrams and technical documents 9.1 The Approach for Design of Hydrostatic systems 9.1.1 Determination of designed requirements 9.1.2 Analysis for working conditions and determination of  main parameters 2）Movement parameters analysis Fig.9-2b is a speed-displacement （v-l）curve drawn to express the speed of each actuator in different phases, it is called speed chart. (2) The friction resistance force 2. The determination of main parameters 3. Working condition chart of the actuators 9.1.3 The determination of hydraulic system diagram 9.1.4 calculation and selection of hydraulic components Tab.9-3 Experiential values of the pressure loss in the inlet oil line 3. Selection of valve arrangements 9.1.5 Performance check for a hydraulic system designed 2. Checking of the temperature rise caused by heat generation 9.1.6 Drawing of working diagrams and technical documents 9.2 A Design Example of Hydraulic System 9.2.1 Analysis of working conditions 9.2.2 Determination of main parameters of the actuator 9.2.3 Design of hydraulic systems 9.2.4 Selection of hydraulic components 9.2.5 Performance checking of this hydraulic systems 9.2 A Design Example of Hydraulic System 9.2.1 Analysis of working conditions 9.2.2 Determination of main parameters of the actuator Then : 9.2.3 Design of hydraulic system 9.2.4 Selection of hydraulic components From the pressure and flow rate calculated above, the PV2R12- 6/26 type pair vane pump can be adopted, The deliveries of