笔盖注塑模具.docVIP

毕业设计(论文)说明书 题 目： 笔盖注塑模具设计 院 （系）： bbbbbbb学院 专 业：机械设计制造及其自动化 学生姓名： ggggggg 学 号： 1000110107 指导教师单位： 桂林电子科技大学 姓 名： ffffffffff 职 称： 讲师 题目类型：(理论研究 (实验研究 (工程设计 (工程技术研究 (软件开发 2014年05月 摘 要 日用品，有时采用精度和强度不太高的塑料传动，由于塑料具有可塑性强，密度小、比强度高、结缘性、化学稳定性高、外观多样的特点，因而受到越来越多的厂家及人民的喜爱。塑料工业是新兴的工业，是随着石油工业的发展而应而生的，目前塑料制件几乎已经进入一切工业部门以及人民日常生活的各个领域。随着机械工业电子工业，航空工业、仪器仪表工业和日常用品工业的发展，塑料成型制件的需求量越来越多，质量要求也越来越高，这就要求成型塑件的模具的开发，设计制造的水平也须越来越高。本文也就对日用品中的笔盖模具设计过程进行阐述。 关键词：注塑模；一模12穴；型腔；导柱； Abstract Daily necessity, sometimes adopt the not that high plastics of accuracy and strengths to spread to move, because the plastics has the plasticity strong, the density is small, higher than strength, the knot good luck, the chemistry stability is high, diverse characteristics of external appearance, as a result be subjected to more and more factories house and the peoples fancies.The plastics industry is a newly arisen industry, is along with the development of the petroleum industry but should but living of, the plastics system piece almost have already entered each realm of the whole industry sections and peoples daily lifes currently.Along with the machine industry electronics industry, aviation industry, the instrument appearance industry and usually the development of the thing industry, the plastics models the demand of make the piece more and more, the quantity request is also more and more high, this will beg model the piece of the development of the molding tool, the level of the design manufacturing also the beard is more and more high.This text also design the process to carry on elaborate to a cover molding tool. Key words：Injection mold; Exactly 12 holes; Cavity; Guide post; 目 录 引言 1 1 塑件总体分析 2 1.1 尺寸分析 2 1.2 材料的选择 2 1.3体积及质量计算 4 1.3.1体积的计算 4 1.3.2质量及面积的计算 4 2 型腔数目的确定 5 3 成型零部件的设计 6 3.1 型腔、型芯工作尺寸计算 6 3.1.1型腔尺寸计算 7 3.1.2型芯尺寸计算 7 3.2 成型零部件的强度与刚度计算 7 3.2.1刚度校核 7 3.2.2强度校