金港市政工程路基施工质量控制-毕业论文.docVIP

  • 4
  • 0
  • 约9.86千字
  • 约 22页
  • 2016-10-29 发布于辽宁
  • 举报

金港市政工程路基施工质量控制-毕业论文.doc

  毕 业 设 计 题目: 太湖金港市政工程路基施工质量控制 Abstract:ith the rapid growth of national economy, the quickening of urbanization. For the traffic demand is increasingly, how to improve the quality of urban road construction, has become the top priority. As an important part of road structure and roadbed, it is not only the body of the road, it is the carrier of pavement and foundation, the quality of the subgrade directly determines the quality of the road. Strict control of roadbed construction, guarantee the quality of roadbed construction, to improve the quality of road construction plays an important role. A highway construction can achieve the desired purpose, subgrade construction mainly depends on the situation, and in the construction quality of subgrade construction is the core. In combination with the practical situation of the project, this thesis mainly discusses the subgrade construction quality as well as to the construction of the control. The project roadbed subgrade bed of (good) roughly divided into general and special subgrade (soft soil subgrade). Affecting the quality of general subgrade are: the overall stability, strength, water stability, drainage facilities and other factors. Soft foundation treatment are: sand cushion layer, filling replacement, riprap crowded silting method, method of reinforcing soil pile, sand compaction pile, back pressure to protect road, plastic drainage plate method. Keywords: subgrade ;degree of compaction; particle size distribution ;soft ground treatment; sand filling method 目录 1.太湖金港工程概况 1 1.1路基种类 1 1.1.1一般路基 1 1.1.2特殊路基 1 1.2工程概况 1 1.3金港工程路基情况 2 2.路基施工质量要求 3 2.1路基整体稳定性 3 2.2路基强度 3 2.3路基水温稳定性 3 2.4路基排水施工 3 2.5上下边坡稳定美观 3 3.路基施工质量控制 4 3.1路基压实度的控制 4 3.1.1回填料的选择 4 3.1.2填料性质 5 3.1.3填料含水量 5 3.1.4填料粒径 5 3.1.5分层厚度 6 3.1.6压实方法 6 3.2机械作业 6 3.3涵洞及其他构筑物施工 6 4.软土地基质量控制方法 7 4.1砂垫层 7 4.2置换填土 7 4.3抛石挤淤法 7 4.4加固土桩法 7 4.5垫隔土工布法 8 4.6碎石桩 8 4.7挤密砂桩 8 4.8塑料排水板法 9 4.9反压护道法 9 5.路基压实质量的检验 10 5.1标准密度(最大干密度)和最佳含水量的确定方法 10 5.2压实度检验方法 11 5.2.1环刀法 11 5.2.2

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档