张鹏毕业设计说明书.doc

内蒙古科技大学 本科生毕业设计说明书（毕业论文） 题 目：采煤机截割部的设计 学生姓名：张鹏 学 号：0876111534 专 业：机械设计制造及其自动化 班 级：机械08-7班 指导教师：李峰 教授采煤机截割部的设计 摘 要 关键词：Machine Translation Oriented StochasticLexicla Semantic Driven Approach Abstract This brochure describes the type of hydraulic shearer traction unit program design and cutting the Department of Design and calculation process. traction Shearer hydraulic seam thickness can be used for 2-4 m, Hard coal to the gently inclined seam. With the traditional vertical layout of the single-motor compared to Shearer, Shearer will be the ranging-arm installed directly in the cutting of the shell, gear device exclusively on cutting Shell and planetary reducer, the abolition of the spiral bevel gears, gear box fixed, Rocker rotating sets of structures, their structure is simpler, more compact and higher reliability. Ranging-arm of the shearer is directly charged coal, the coal loaded, its about the power consumption of the entire power shearer 80% -90%, mainly by cutting Shell, cutting electrical, Gear and drum components. The shearer cutting unit used four drive; Before three straight tooth drive, the fourth level of planetary transmission. 2 Drive Gear to be for the gears, enabling the output speed can be based on different coal hardness in two tranches within the selected speed. Cutting the Department has adopted a three lazy axle, to meet the shearer cutting height on the ranging-arm degree requirements. Designed to be cutting planetary reducer and drum direct link, canceled installed in the drum Pick, simple and reliable. Key words: shearer, ranging-arm,structure,design 目录 摘 要 I Abstract II 第一章 国内外采煤机研究及应用概况 1 1.1 国内外研究现状 1 1.2 国内外应用状况 3 第二章 传动方案的设计 6 2.1 总体传动方案的设计 6 2.2 传动比分配 10 2.3 截割部第一级圆柱齿轮传动设计 11 2.4 截割部第二级圆柱齿轮传动设计 20 2.5 截割部第一级行星传动设计 29 2.6 截割部第二级行星齿轮传动设计 38 第三章 国内外采煤机研究及应用概况 47 3.1 国内外研究现状 47 3.2 国内外应用状况 49 第四章 截割部辅助零部件的设计 52 4.1 齿轮轴1的设计及校核 52 4.2 第一级惰轮轴的设计及校核 56 4.3 齿轮二轴的设计及校核 59 4.4 第二级惰轮轴的设计及校核 63 4.5 中心齿轮轴的设计及校核 68 4.6 截割部花键连接强度校核