安锋煤矿新井设计_煤矿毕业论文设计说明书.docVIP

摘 要 本毕业设计我所做的是新井设计。 在这次毕业设计之前，我们在高永格老师的带领下到云驾岭矿进行了为期一个月的生产实习。在这次生产实习中，我们收集了大量的设计资料并结合生产中现场工作的经验，完成了对云驾岭矿井的初步设计。并且在这次生产实习中，更加深了我们对今后所从事的工作的了解；同时，我们也获得了先进的设计思想及设计中所涉及到的在学校里所学不到的现场工作经验，为毕业设计的顺利进行打下了坚实的基础。 本次毕业设计是我们毕业设计小组所有成员共同努力的成果。是小组成员经过共同的研讨，反复计算并比较后共同确定的，是我在四年大学学习的结晶。 洺河矿井设计共包括以下几部分： 1.矿井的基本情况。 2.矿井井田内的可采储量，矿井生产能力及服务年限的确定。 3.矿井井田的总体开拓的设计，包括水平的划分，井筒位置的确定，经济比较部分，矿井延深方案的确定，采区的划分，井底车场线路计算，硐室布置及井底车场的通过能力计算等部分。 4.工作面生产机械的参数，工作面生产程序的确定以及采区车场的设计计算等部分。 5.矿井生产中的提升、运输、通风、排水方式的确定及其所用设备额选型计算与相关的硐室布置等。 由于本人水平有限，又没有长时间的生产和工作经验，所以在设计中必定有很多不理想的地方，希望各位老师与同学多多指教，本人感激不尽。 关键词 ： Abstract This graduation project I have done isAnfeng well Nii design. In this graduation design, we at Gao Yongge under the leadership of the teacher to clay mine and conducted a two-month internship. In this practice, we have collected a large number of design data and combining the production field work experience, completed the preliminary design of a mine pottery. And in the production practice, the more deep in the future work we know; at the same time, we also obtain the advanced design idea and design involved in school and failed to learn the field work experience, for graduation design success to lay solid foundation. The graduation design is our graduation design group, the joint efforts of all members of the results. Member of the group through joint research, after repeated calculation and comparison to jointly determine the, I in four years of university study of crystallization. Minghe mine design includes the following several parts: 1.The mine overview and basic characteristics of coal seam 2.Mine Ida Uchi recoverable reserves, mine production capacity and service life determination. 3.Mine mine overall develop the design, including the level of division, wellbore location, economic comparison part, mine extension plan determination, area division, bottom line calculation, chamber arrangement and the bottom of calculating the capacity such as part of. 4.The production of working face