全自动真空成型机(正确版).docVIP

全自動真空成型機 FULL AUTOMATIC VACUUM FORMING MACHINE. 操作程序說明OPERATE PROCEDURE. 打開總電源電熱開關ON，空壓機ON待溫度錶指示燈變紅，表示 溫度到達再開真空泵浦。 SWITCH THE MAIN POWER ON. ALSO AIR COMPRESSOR SWITCH ON. THEN WAIT FOR TEMPERTURE METER GAUGE LAMP TURN TO RED. (MEAN NEED ALREADY REACH NECESSARY TEMPERTURE.) THEN VACUUM PUMP SWITCH ON. 操作控制箱ON手動上升後，膠皮放至成型區ON手動ONON選擇吸氣，有上模時ON，無上模時OFF AT CONTROL BOX. PUSH THE BUTTON ON MANUAL. AFTER UP-RAISING. THEN PUT THE PLASTIC FILM INTO FORMING AREA ZONE. ON MANUAL ON ON SELECT THE SUCKING AIR. WHEN HAVE UPPER MOULD PLS USE ON. IF HAVE NO UPPER MOULD TURN THE OFF. 加熱時間、小真空時間、成型時間、