ModelAT300MultipurposeMachine-focus-machine.docVIP

Model AT300 Multipurpose Machine INSTRUCTION MANUAL Max. swing diameter over bed 厖厖厖?l 300mm Max. length on work piece 厖厖厖厖?m M 500mm Max. drilling capacity 厖厖厖厖厖? Max. 15mm Width of working surface of table 厖厖厖?mm 150mm Serial No. IMPORTANT! Please read this INSTRUCTION MANUAL carefully in order to avoid dangers from being unfamiliar with this machine before installation and operation. Appearance of the AT300 Multipurpose Machine Safety Precautions Only when the machine is fixed firmly, may you use it. Before operation, users must check and make sure the power source is right for this machine, especially it must be properly connected with single-phase power source. This machine isnt equipped with illuminant apparatus. Users must mount it themselves. The mounted illuminator must not generate too strong light, flash light or shadow. Dont use this machine in dangerous environment, and dont put it in damp or wet places. The work place should be dry. Always remove chuck key before starting. Wear proper apparel. No loose clothing, ties, gloves, bracelets or other jewellery which will get caught in moving parts. Non-slip footwear is recommended. Use protective hair covering to contain long hair. Before operation, ensure that the drive box and the mill/drill head are covered properly. Always use safety glasses. Common eyeglasses have no impact resistant lenses and they are not safety glasses. Always keep alternate cutting tools or measuring tools in place and keep work area clean. Cluttered areas and tables invite accidents. Non-operators must keep a safe distance from the running machine. While a long work piece extends out from the back hole of spindle, please adopt a series of safety measures to guard against the dangers coming from the vibration and rotation of the work piece. Do not process a work piece exceeds the designed range. Always secure your work pieces, use vices and clamps-hands are no substitute. Alw