Modul_A01-Siemens.docVIP

Training document for the company-wide automation solution Totally Integrated Automation (T I A) MODULE A1 Totally Integrated Automation (T I A)  This document was provided by Siemens AD SCE (automation and drive technology, Siemens AD Cooperates with Education) for training purposes. Siemens does not make any type of guarantee regarding its contents. The passing on or duplication of this document, including the use and report of its contents, is only permitted within public and training facilities. Exceptions require written permission by Siemens AD SCE (Mr. Knust: E-Mail: michael.knust@hvr.siemens.de). Offences are subject to possible payment for damages caused. All rights are reserved for translation and any case of patenting or GM entry. We thank the company Michael Dziallas Engineering and the instructors of vocational schools as well as further persons for the support with the production of the document  PAGE: 1. Forward 4 2. What is T I A 5 3. Presentation of the Various Systems 7 3.1 The SIMATIC PLC- Controllers 7 3.1.1 SIMATIC S7-200 7 3.1.2 SIMATIC S7-300 8 3.1.3 SIMATIC S7-400 9 3.2 Industrial Communication 10 3.2.1 Industrial Ethernet 11 3.2.2 PROFIBUS 12 3.2.3 AS- Interface 13 3.3 Human Machine Interface (HMI) 14 3.4 SIMATIC Industry Software 15 3.4.1 STEP 7 15 3.4.2 Sequencer programming S7-GRAPH 16 3.4.3 State control S7-HiGRAPH 17 3.4.4 High level language S7-SCL 18 3.4.5 Soft- PLC SIMATIC WinAC Basis 19 3.4.6 SIMATIC ProTool/Pro 21 3.4.7 HMI SIMATIC WinCC 22 3.4.8 Process control system PCS 7 23 3.5 Drive Technology 24 3.6 Operation- and Installation Technology 26 The following symbol stands for the specified module: Information  1. Forward The module A1 is assigned content wise to the Basics of STEP 7- Programming and represents a quick start in the STEP-7 Programming. Learning goal: The reader is introduced to the philosophy of Totally Integrated Automation (T I A). Therefore the reader should receive an ove