Estimate.xlsVIP

Sheet1 Estimate SL. NO. SUB HEAD - IV (SUPPLY OF FIXTURES FANS) SUB HEAD - VI (SUPPLY MAKING OF EARTHPITS) SUB HEAD - I (WIRING) UNIT QTY Supplying and drawing fixing 8 SWG copper conductor wire for loop earthling as required. Mtr. Set Each TOTAL SUB HEAD-II SUB HEAD - II (DISTRIBUTION BOARDS PANELS) TOTAL SUB HEAD-IV TOTAL SUB HEAD-III SUB HEAD - V (SUPPLY OF CABLE MAIN SUBMAIN) Set. AMOUNT RATE INCOMING: METERING: UPS INPUT OUT PUT OUTGOINGS: BUS BAR: ITEM OF WORK Supply and fixing of following sizes of PVC conduit along with accessories in surface/ recess i/c cutting the wall and making good the same in case of recessed conduit as reqd. a) 20 mm b) 25 mm Supplying Fixing following ways three pole and neutral sheet steel MCB DB, 415 volts on surface/ recessed complete with tinned copper busbar, neutral busbar, earth bar din bar detachable gland plate interconnections, phosphatised and powder painted i/c earthing etc as reqd. ( But without MCB / RCCB/Isolator) S/F 5 amps to 32 amps rating 240 V C series MCB suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc as reqd. nos. S/F remote controlled call bell buzzer suitable for 230 V AC/ Battery operated with remote type bell push as reqd. Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq mm FR PVC insulated copper condtr single core cable in surface/ recessed PVC conduit with modular switch, modular plate, suitable GI box and earthing the 3rd point with 1.5 sqmm FR PVC insulated copper conductor single core cable etc as reqd. S/F suitable size GI box with modular plate and cover in front on surface/ in recess i/c pvdg fixing 5 pin 5/6 amp modular socket outlet and 5/6 amps modular switch, connection, painting etc as reqd. Supply laying for sub main from L.T line DG line following sizes and core PVC/XLPE insulated PVC sheathed, heavy duty, armored electrical cable with aluminum conductor for working v