激光淬火对于汽缸套寿命的影响论文初稿.doc

山 东 交 通 学 院 本科毕业论文 激光淬火对气缸套寿命的影响 所 在 学 院 专 业 名 称 申请学士学位所属学科 你的封面从那抄的不符合标准 年 级 学生姓名、学号 指导教师姓名、 职称 完 成 日 期 Based on the comprehensive analysis of domestic and international laser processing technology, the laser quenching machine cylinder of diesel engine. The principle is the use of a laser beam scanning the workpiece with high energy density, so that the irradiated metal in order to speed up above the transition point and lower than the melting temperature, when the laser beam from the irradiated area, due to the role of heat conduction in the substrate, cold the rapid cooling and self quenching then, the phase transformation hardening workpiece table. This paper analyses the technical parameters of laser quenching cylinder diesel engine in theory, puts forward the calculation method of reticulate pattern hardening laser quenching several forms of 16V240ZJ diesel engine cylinder liner hardened with pitch. To investigate the mechanism of laser hardening can improve the service life of diesel engine cylinder liner, analyzed the temperature of laser quenching technique. Experimental study of 16V240ZJ diesel engine cylinder sleeve (boron alloy cast iron) effect of laser parameters of laser hardening of the surface of the cylinder liner of hardening, laser quenching after measuring the hardness, the observation and analysis of the hardening layer of the microstructure, morphology, and the wear test, the microscopic interpretation of laser hardening, verification the laser quenching can significantly increase the service life of the diesel engine cylinder liner. Keywords: laser quenching, the service life of cylinder liner, diesel, boron alloy cast iron, wear resistance   目 录 摘 要 Ⅰ 目 录 1 1 引言 2 2 油机缸套表面激光淬火处理的工艺