智能交通信号控制机的研究和设计.pdf

Abstract Intelligent traffic signal controller play key role of in the intelligent transportation system . It usually receives information from vehicles on the road, to controller traffic lights, to communicate between it and traffic command center for realize regional coordination control. So, it is not only unit controlled but also actuator. Intelligent traffic signal control machine function directly affects the ability of road traffic management, urban development.Intelligent traffic signal control machine research is of profound significance. For effective to control traffic, Intelligent Traffic Signal Controller combines traffic information collector, software, hardware intelligent algorithm and the coordination control of traffic command center functions etc. The thesis includes four mainly parts: Firstly, in order of real timing monitor passage of road vehicles and provide the necessary data to intelligent traffic signal controller for the intelligent decision, so, designed Loop Vehicle Detector. The thesis elaborated the function, classification and characteristics of vehicle detector. Through highlighted to introduce the way detected of Loop Vehicle Detector, to use detection of the frequency comparison method and to embed uIP protocol stack implement networking vehicle detector design .last, the thesis show to test and to analyze result Secondly, under the effective access to the information of road vehicles, design focus on traffic signal machine itself. The device applied S3C2410ARM as core processor and design various peripherals circuit as hardware of Intelligent traffic signal controller and software by transplant u-Boot，Linux ，yafft2 which is a computer file system and embedded database management system SQLite.The thesis gives details of the various parts of the design process and the main code Thirdly, for the sake of achieving intelligent control of traff