ColdDrawnSeamlesTubesforHydraulicCylinders.PDFVIP

Seamless precision steel tubes for hydraulic cylinders - TN 008-00 TN 008-00 Tenaris produces a wide dimensional range of cold drawn seamless tubes suitable for the manufacturing of hydraulic cylinders. The tubes are produced with close tolerances in two dimensional series, one for skiving and roller burnishing and the other for honing on the internal diameter. Two grades of easily weldable steel are used; both grades can be supplied with inclusions specially treated in such a way as to guarantee better machinability. 2 TN 008-00 Seamless precision steel tubes for hydraulic cylinders Product description and application 2. Standards of reference This specification is for cold-drawn seamless tubes suitable for • The overall Tenaris dimensional range is indicated in the table hydraulic cylinder application. It defines the dimensions, on pages 6-7 and includes the standard internal dimensions tolerances, chemical composition, mechanical properties and from 0.787” to 9.845” as specified by the ISO 3320/1987 technical conditions of supply. standard Fluid power systems and components. The product can be supplied with two different series of machi