metalsheetSBsteelfinishingmachine-Acterenterprises.docVIP

Attn: From: Mr. LIU ACTER ENTERPRISES Tel/M.P.: Tel/Fax:86 53282607675 Fax: Issue date:2010-07 Re: Doc.No.: （一）,MS13 series Sheet surface grinding machine (dry application) Model RR with 2 abrasive belts Model RRR with 3 abrasive blets Model RRB with 2 abrasive blets+1 Brush Its main applications: 1, polishing stainless steel to #3 or #4 or satin finishes 2, light grinding or finish polishing sheets or plate; 3, surface oxide removal Main features: Centralized operator control panel and pilot lights Single or multiple abrasive belts or SB brush, easy to replace Photoelectric belt centering and tracking Digital working thickness read-out Double Ridged rubber-coated pressure rollers Max. working width:1300mm, Working length: more than 320mm; working thickness: 0.3-30mm;Max feed speed: about 20m/min Conveyor bed ,precisely up or down, on 4 spindles, Technical parameter Machine model MS13RR MS13RRR MS13RRB Work piece Thickness 0.5-10mm 0.5-10mm 0.5-10mm Length More than 320mm More than 320mm More than 320mm Width 40-1300mm 40-1300mm 40-1300mm Abrasive belt Linear speed About 14 m/s About 14 m/s About 14 m/s Size(WxP) 1330x1900mm 1330x1900mm 1330x1900mm Conveyor belt Feed speed 5-20m/min 5-20m/min 5-20m/min Size(WxP) 1300x3350mm 1300x3350mm 1300x3350mm Motor （KW） motor 22.0kw 22.0kw for NO.4 2.5kw+reducer for HL OPTIONAL 22.0kw NO.2 main motor 22.0kw 22.0kw NO.3 main motor 7.5kw Feed-in motor 4.0 4.0 4.0 Lifting motor 0.37 0.37 0.37 Air Consumption volume About 0.66m3/min About 0.76m3/min About 0.76m3/min Working pressure 0.55MPa 0.55MPa 0.55MPa Dust Exaction Wind volume 6500 m3/h 8500 m3/h 8500 m3/h Pressure About 2300Pa About 2300Pa About 2300Pa Wind speed 25-30m/s 25-30m/s 25-30m/s Its current FOB prices per set: 1,Dry-type Sheet surface grinding machine, Model MS13RR for NO.4 finish—USD22,900.00/set ;