PECMechanicalPTOClutchesandParts-TIMCOService.PDFVIP

PEC Power Take-Offs Quality Clutch Parts PEC Power Take-Offs are designed to fit all internal combustion engines with stan- dard SAE flywheel housing dimensions from No. 6 through No. O. The clutches range in size from one plate 6” to three plate 14”. Suitable power take-offs are available for use with engines in industrial installations up to 583 horsepower. A Power Take-Off consists of a complete clutch assembly with shaft and bearings mounted in a cast iron housing that provides for easy engine installation. PTO’s are used as a standard method for transmitting the power of engines in a great variety of industrial applications such as: air compressors, agricultural ma- chinery, pump drives, crushers, road building machinery, cranes and shovels, oilfield service, etc. PEC offers power take-offs for all industrial engines with sealed pilot bearings to eliminate the lubrication requirement and shaft rifle-drilling normally encountered with standard pilot bearings. Actual design torque capacity of the clutches used in power take-offs is in excess of the horsepower rating listed. This permits PEC power take-offs in proper ad- justment to withstand temporary torque overloads. Rated torque can be trans- mitted while moderately slipping during short periods without permanent damage. CO-STYLE POWER TAKE-OFF CN-STYLE POWER TAKE-OFF 1 1 Plate 6 Model CO1-06-5A 1 Plate 7 Model CO1-07-5A 31 34 33 32 28 29