ClickheretofindouthowImadetheflashprogramme.(pdf).PDFVIP

How I made the flash programme. The programme starts with launcher.swf at level 0 it contains only this action script: loadMovieNum(proximity.swf, 22); This loads the scenario2 splash screen (Proximity.swf) into level 22. * Flash allows the loading of movies on top of each other into levels 0 being the bottom and 100 the top. The splash screen fades in and out the title of the scenario, unloads all other movies on all levels 1-21 and then loads scenario2.swf into level 16: loadMovieNum(scenario2.swf, 16); The programme consists of two scenarios, Activity and Proximity. The Proximity is scenario2 and consists of 5 stages (also referred to as levels but not in this report). Movie a, b c is on stage 5; d, e f on stage 4; g, h I is on stage 3; j, k l is on stage 2 and m, n o is on stage 1. On the image Layers below you can see the stages separated by a layer called Fademask. The Layers are as follows. On the top layer is the actionscript code. The text and keys layers are guides for designing. Layer A-O is the audio-visual movies. Layers The blue letters are guides to help with accessing the each movie. This grid helps identify The Fademask(s) are used to the key in use. create perspective for each level. The Fademask for level MNO begins higher on the screen than level ABC and therefore seems further away or deeper than level ABC. The main code used in flash file for both movies. This code controls the sensor input. It is the same for both scenarios but this is the code for scenario 2 “Proximity”. stop(); unloadMovieNum(22); a.onEnterFrame = function () { This selects the first scenario // key 1 = CHANGE S