JobHazardAnalysis-TrailReconstruction-Wilderness.net.docVIP

U.S. Department of Agriculture 1. WORK PROJECT/ACTIVITY 2. LOCATION 3. UNIT Forest Service Trail Maintenance and Construction Sawtooth National Recreation Area D4 JOB HAZARD ANALYSIS (JHA) 4. NAME OF ANALYST 5. JOB TITLE 6. DATE PREPARED References-FSH 6709.11 and -12 (Instructions on Reverse) Debra Peters, Jay Dorr Forestry Technician 5/4/2005 7. TASKS/PROCEDURES 8. HAZARDS 9. ABATEMENT ACTIONS Engineering Controls * Substitution * Administrative Controls * PPE 1. Tool Preparation (hand file, power disk) Cut fingers, arms Wear gloves, safety goggles, and long sleeve shirt. Have a stable work surface. Watch what you are doing. When using grinder wear shield and apron and get instructions. Take your time. Replace tool handle if it is extremely dry, cracked, or warped. Also, replace handle if it is loose and already has 2 or more wedges in it. When using a file make sure it has both a handle and a guard. Remove pitch from tools before going into the field. Refer to pages 131-132 of Trail Construction and Maintenance Notebook (TCMN) for sharpening instructions or watch the video An Axe to Grind. 2. Vehicle Operation Mechanical failure Flat tires Vehicle fire Exhaust Leaks Internal projectiles Carbon monoxide gas Large vehicles Narrow, rough roads Animal/object collision Icy/muddy roads Flying debris Poor visibility Backing Run-away vehicle Roadway obstacles Fatigue Adhere to the vehicle’s schedule of preventative maintenance. Use only vehicles appropriate to work needs and the driving conditions expected. Check for tire cuts, fluid leaks, flat tires, body damage, windshield cracks, and other damage daily. Check lights, wipers, fluid levels, and seat belts daily. Ensure the vehicle has a complete and current first aid kit and fire extinguisher, warning signs and/or flares. Ensure the vehicle is equipped with a working mobile radio or carry a handheld radio. Place heavy objects behind a secure safety cage if they must be carried in a pass