机械毕业设计（论文）-椭圆曲线组件数控编程与加工仿真【全套图纸】.doc

摘 要 本设计是组合件零件的加工工艺规程及数控编程与仿真加工,组合件零件的主要内容就是加工平面及内孔。数控编程均采用Fanuc语言，外椭圆曲线、梯形螺纹采用宏程序进行编程。利用CAXA软件，对零件进行仿真加工。基准的选择以配合件外圆柱面作为粗基准。 关键词: 宏程序、仿真加工、外椭圆曲线加工、梯形螺纹 全套图纸，加153893706 ABSTRACT This paper is to design the craft processes of making cheveril spare parts and some specialized tongs in the process. Therefore, this design follows the principle that surface first and then the bore, and definitely divides the process of flat surface and bore into coarse processes and precise processes to guarantee the bore processes. The bottom is first processed out to be fixed position basis, and process the bore using the bottom as the precise basis. The whole processes choose the machine bed. In the aspects of tongs choosing, specialized tongs are used. In consideration of the simple construction size of the spare parts, clipping by hands is adopted. It is simple, and the organization design is simple, and can satisfy the design request. Outside the Elliptic Curve Machining、 macroprogram、 the simulation process、、Trapezoidal thread 目录 摘要.............................................................................................Ⅰ Abstract......................................................................................Ⅱ 目录 ............................................................................................Ⅲ 1 概述..........................................................................................1 1.1 数控系统的介绍.....................................................................1 2 加工工艺规程设计…………………………………………………1 2.1 零件的工艺分析………….….…………………….………….…1 2.2 确定毛坯..............................................................................4 2.3 拟定生产路线........................................................................4 2.4 机床、夹具、刀具、量具和切削液的选择………….……….…...10 2.5 确定工序的加工余量……………………………..……….…….11 2.6 确定工序的切削用量及工时定额…………………...……………11 2.7 本章小结………………………………………………………..14 3 数控程序设计………………………………………….……….....14 3.1 概述…………………………………….………......……….....14 3.2 数控程序…………………………………………….……….…14 4 自动编