罐头厂废水处理设计.doc

毕业设计（论文） 设计（论文）题目：1300m3/d罐头厂废水处理设计 专 业： 班 次： 姓 名： 指导教师： 二〇 一二 年 六 月 1300m3/d罐头厂废水处理设计 环境监测与治理技术 专业 学生 戴俊科 指导教师 彭明江 摘要 随着人们生活水平的提高和生活节奏的加快，Abstract With the rapid development of living standard and the quicken pace of life together with the fast-developed tourism, the demand for canning foods has increased sharply. Recently, as the production of canning foods promotes a lot, a growing number of canning factories are under construction, and some of which are reconstructed. There are so much organic wastewater let out during the process of canning food production, so the sewage disposal must be taken into consideration accomplished with the construction of canning factories. So this paper takes the high concentration of organic wastewater from canning factories as the research object, whose main route is to use the oil the oil removal + hydrolysis + AO to deal with the high concentration of organic wastewater via theory analysis and practical investigation. This paper also gives a deeper analysis of the project designation, construction and operation of bread factories where the oil removal + hydrolysis + AO are applied. This paper also gives a brief introduction of the origin, characteristics and meaning of governing to the organic wastewater, the research and appliance of it both at home and abroad. Meanwhile, this paper explains the characteristics of the oil removal + hydrolysis + AO. Through the research and analysis of the oil removal + hydrolysis + AO station which has been applied in the process of production. This paper gains a deeper discussion on the operational parameters of the oil removal + hydrolysis + AO, and a deeper analysis of the operation effects, efficiency, influence factors and the controlling conditions of each unit. All the paper wants to gain is a reliable reference value to the sewage disposal to the same type of factories. The designed water release reaches the primary standard