华为相当不错的存储培训资料.pptVIP

* * RAID50 数据分布按照如下方式来组织： 首先将分为n组磁盘，然后将每组磁盘做RAID5，最后将N组RAID5条带化。上图中，磁盘0、磁盘1和 磁盘2，磁盘3、 磁盘4和磁盘5为RAID5阵列，然后按照RAID0的方式组织数据，最后得到数据存储示意图。 RAID50是为了解决单个RAID5阵列容纳大量磁盘所带来的性能（比如初始化或重建时间过长）缺点而引入的。 * * * * This is the view we have before the Snapshot is taken. * This is the beginning of the Snapshot process. Here you want to point out that the entire process will only take a very short period of time ( seconds at the most ). The repository size listed here is 20%, this is the default the software will use if you do not specify a size for the repository. You want to point out that the snapshot volume sh