程式設計作業二繳交日期2010510班級電機1A姓名魏晧軒學號.docVIP

程式設計作業二 繳交日期：2010/5/10 　　班級：電機1A 　　姓名：魏晧軒 　學號：498415035 題目編號 – Write a program to model a simple calculator. Each data line should consist of the next operation to be performed from the list below and the right operand. Assume the left operand is the accumulator value (initial value of 0).You need a function scan_data with two output parameters that returns the operator and right operand scanned from a data line. You need a function do_next_op that performs the required operation. Do_next_op has two input parameters (the operator and operand) and one input/output parameter (the accumulator). 解答 – 解答寫法，請參照第四章節的Case Study water bill problem。但是此次的內容不必要完全相同，需求的內容依照下面的標題作(ex. 1. ANALYSIS …) 解答要求： ANALYSIS DATA REQUIRED Problem input: char just_operator /*使用者輸入操作方法*/ int user_enter_numbers /*使用者輸入的分母or小數點以前數字*/ int user_enter_numbers1 /*使用者輸入的分子or小數點以後數字*/ Problem output: double accumulator /*使用者前為止的計算總結*/ IMPLEMENTATION(程式碼本身需加註解) #includestdio.h #includemath.h void scan_data(char *just_operator,int *user_enter_numbers,int *user_enter_numbers1,double *temp,int *temp1); //用來讀取使用者所輸入的運算子 分子分母or整數小數 void do_next_op(char just_operator,double *accumulator,double temp,int user_enter_numbers,int user_enter_numbers1,int temp1); //用來計算使用者所輸入的數字 int main() { char just_operator; //儲存運算子 int user_enter_numbers; //儲存分子/整數 int user_enter_numbers1; //儲存分母/小數 int temp1=0; double temp; double accumulator=0; printf(This is a simple calculator.\n); printf(You can use it to operate numbers including + - * / ^ .\n); printf(Please enter in this form (operator numbers ex: + 5 . 0)\n); printf(If you want to enter a common fraction as two integers separated \n); printf(separate them by a slash.); printf(If you want to leave,enter q 0 . 0 \n); do{ printf(enter:); scan_data(just_operator,user_enter_numbers,user_enter_numbers1,temp,temp1); do_next_op(just_operator,accumulator,temp,user_enter_numbers