自动旋转门毕业设计.doc

中国地质大学（北京）继续教育学院 毕业论文 设计题目 自动旋转门设计 学生姓名 韩玉莲 学 号 1201132220052 专业班级 机械1班 指导老师 卜长根 2014年 5 月 中文摘要 随着计算机、网络、通信技术的发展，各种方便生活的自动控制系统逐步进入了人们的生活。自动门是随着人们对生活条件的不断追求、科技的不断发展应运而生的高科技产品，因此它具备了普通门所没有的优势：高端大气上档次，而且使用管理起来更加的安全、方便、舒适，通电后可以实现无人看管，同时又可节约能源、防风、防尘、降低噪音，既方便又提高了建筑的档次。由于早期自动门控制系统采用继电器逻辑控制，即通过按钮和复杂的接线安装来控制。造成安装繁琐、体积大、不稳定、不易维修等缺点。而后由于PLC的自动控制系统具有抗干扰能力，可靠性高，体积小，设计、使用和维护方便等优点，应用在自动旋转门的设计当中，并越来越广泛，越来越智能化、人性化。 关键词： 旋转门；PLC； 驱动系统；传感器 ABSTRACT With the development of computer, network, communication technology, a variety of convenient automatic control system of life gradually entered peoples life. Automatic door is the high-tech products, rises in response to the proper time and conditions along with the People chasing the better living conditions and the development of science continually , so it has the advantages which the ordinary door without: high-end high grade, and the use of management is more safe, convenient and comfortable, it can realize the unattended after electrify, in the meantime It is windproof, dustproof, and noise reducing, it is convenient and increases the level of the building. Due to the early automatic door control system with the relay logical control, that is controlled by button and complicated wiring installation it cause the complicated installation , big volume, instability ,not easy to repair shortcomings, then the PLC automatic control system has the advantages such as anti-interference ability, high reliability, small size, convenient design and operation easily and it is put into the design of automatic revolving door, and It is more and more widely, more and more intelligent and humanization. Key words：Revolving door; PLC; drive system; sensor 1 绪 论 - 1 - 1 .1、旋转门的设计目的 - 1 - 1 .2、旋转门的发展历史 - 1 - 2方案选定 - 2 - 2 .1、旋转门方案一 - 2 - 2 .2、旋转门方案二 - 2 - 2 .3、旋转门方案的选择 - 3 - 3门体结构设计 - 3 - 3 .1、门结构材料的选用 - 4 - 3.2旋转门门主要结构尺寸的确定 - 5 - 4驱动系统设计 - 7 - 4.1旋转门驱动系