600MW培训资料(中英对照).pptVIP

The gland sealing system is designed to prevent ingress of cold air into the turbines and from there into the condenser under all operating conditions . In addition, it must be prevented that the gland steam escaped into the machine hall. The gland sealing system performs the following tasks: SEAL STEAM SUPPLY TO THE SHAFT SEALS; EXHAUST OF GLAND STEAM FROM THE SHAFT SEALS; CONDENSATION OF THE GLAND STEAM IN THE GLAND STEAM CONDENSER; EXHAUST OF NON-CONDENSABLE GASES FROM THE GLAND STEAM CONDENSER TO ATMOSPHERE. 汽封系统的作用是在转子和门杆处，防止空气漏入或蒸汽漏出蒸汽室。 汽封系统有以下作用： 轴封供汽 轴封漏气 通过汽封冷却器冷却轴封漏气 通过汽封冷却器排除不凝结气体 LP BRG OIL RESERVOIR 油箱 OIL PUMPS 油泵 MAIN OIL PUMP 主油泵 D-015 MAIN OIL PUMP BEARING OIL PUM 轴承油泵 EMERGENCY OIL PUMP 危急油泵 SEAL OIL BACKUP PUMP 氢密封备用油泵 LIFTING OIL PUMPS 顶轴油泵 MAIN OIL PUMP OIL COOLER 板式冷油器 PLATE OIL COOLER GLAND STEAM CONDENSER 汽封冷却器 THE PURPOSE OF THE GLAND STEAM CONDENSER IS TO MAINTAIN IN THE GLAND LEAK OFF SYSTEM A PRESSURE SLIGHTLY BELOW ATMOSPHERIC PRESSURE, TO PREVENT THE ESCAPE OF STEAM FROM THE ENDS OF THE GLANDS, AND TO REMOVE AND CONDENSE THE VAPOR. 汽封冷却器的作用是维持汽封漏泄系统的压力略低于大气压力，防止从各汽封段逸出蒸汽以及抽取和凝结蒸汽。 GLAND STEAM CONDENSER * 1.此联合轴承不同于早期国产的联合轴承，比较起来结构更加紧凑，推力轴承在两推力盘之间，两副瓦相背。 2.轴承瓦面合金成分与目前常规机组广泛使用的ZSnSb11Cu6和ZSnSb8Cu4稍有不同，现有成分含量略有变化并新加入了Zn和Ag，从而大大改善了其物理性能。主要成分Sb 12%，Cu 6%，Zn 0.6%，Ag 0.1%，其余为Sn。 * * * * STEAM TURBINE AUXILIARIES FOR2×600MW HISAR THERMAL POWER PLANT海萨项目辅助系统介绍 CONTENTS 目录 1 GLAND STEAM, DRAIN, LUBE OIL SYSTEM INTRODUCTION EQUIPMENT INSTRUCTION 1 汽封、疏水、润滑油等系统介绍 2 主要设备说明 GLAND STEAM, DRAIN, LUBE OIL SYSTEM INTRODUCTION LUBRICATION OIL SYSTEM GLAND SEALING STEAM SYSTEM DRAIN SYSTEM EXHAUST HOOD SPRAYS 1 汽封、疏水、润滑油等系统介绍 润滑油系统 汽封系统 疏水系统 低压缸喷水系统 LUBRICATION OIL SYSTEM SYSTEM DESCRIPTION COMPONENTS DESCRIPTION OPERATION INST