低频PWM控制的升压升压DC DC转换器.pdfVIP

CMOS Low Power Consumption Operating Voltage : 0.9V~10.0V Cellular phones, pagers Output Voltage Range : 2.0V~7.0V Palmtops Cameras, video recorders Output Voltage Accuracy: ±2.5% Portable equipment Oscillator Frequency : 30kHz 4 The XC6373 is a group of PWM controlled step-up DC/DC converter ICs. Operating (start-up) voltage range The XC6373 series employs CMOS process and laser trimming : 0.9V~10V technologies so as to attain low power and high accuracy. Output voltage range : 2.0V~7.0V in 0.1V increments The implemention of a new phase compensation circuit and a slow start Highly accurate : Set-up voltage ±2.5% function ensure excellent transient response and improved performance. Oscillator frequency : 30kHz (±20%) The series is particularly suited for use with pager applications because Maximum output current (Tr. Built-In) of their low power consumption and low noise characteristics. : 50mA (TYP.) @ VIN=3.0V, Output voltage can be selected from 2.0V to 7.0V in 0.1V increments VOUT=5.0V Note (1) (accuracy; ±2.5%). Oscillator frequency is set at 30kHZ (±20%) so as to Highly efficient (Tr. Built-In) attain the lowest consumption current possible. : 82% (TYP.) @ VIN=3.0V, A step-up converter circuit can be configured using the XC6373 IC with a VOUT=5.0V Note (1) coil, a diode, and a capacitor. Either chip enable or independent VOUT pin option is 5-pin packages, which are provided with either a CE (Chip enable) selectable for 5-pin package units. function that reduces power consumption during shut-down mode, or a Phase compensation and slow start-up circuits included. VDD pin (separated power and voltage detect pins) are available. Small Package : SOT-89 mini-power m