PFM控制的升压升压DC DC转换器.pdfVIP

Duty 58% CMOS Low Power Consumption Cellular phones, pagers Operating Voltage : 0.9V~10.0V Palmtops Cameras, video recorders Output Voltage Range : 2.0V~7.0V Portable equipment Output Voltage Accuracy: ±2.5% 4 The XC6381 series is a group of PFM controlled step-up DC/DC Operating (start-up) voltage range converters. : 0.9V~10V The XC6381 series employs CMOS process and laser trimming Output voltage range : 2.0V~7.0V in 0.1V increments technologies so as to attain low power and high accuracy. Highly accurate : Set-up voltage ±2.5% Max. oscillator frequency is trimmed to 155kHz (accuracy: ±15%). Maximum oscillator frequency Every built-in switching transistor type enables a step-up circuit to be : 155kHz (±15%) configured using only three external components ; a coil, a diode, and a Duty Ratio : 58% (±5%) capacitor. External transistor versions are available to accommodate Both built-in switching transistor and external types are high output current applications. available Both built-in and external transistor types include 5-pin and 3-pin Five-lead packaged units offer either Chip Enable or packages, which are provided with either a CE (chip enable) function that independent VOUT pin option. reduces power consumption during shut-down mode, or a VDD pin Small package : SOT-23, 25 mini-mold (3-pin, 5-pin) function (separated power and voltage detect pins). SOT-89, 89-5 mini-power mold SOT-23, SOT-25, and SOT-89-5 super mini-mold packages. (3-pin, 5-pin)