毕业设计（论文）_基于红外收发信号的自动洗手器系统.docVIP

摘 要 本文设计的红外自动洗手器是一个多功能的红外自动洗手器，区别于市面上的普通的自动洗手器，它不仅实现了能够在红外感应的范围内，自动出水，而且能够通过按键设定红外感应的距离，没有达到设定的红外感应距离，洗手不工作，不会出水，并且通过LCD液晶显示测出物体或手到红外接收、发送头的距离和按键所设定的红外感应距离。不仅达到设计要求，而且也拓展了一些功能。本文所设计的红外自动洗手器主要由红外线，，继电器，及电源电路组成。采用红外线接收与发射，控制的，继电器控制电路的开关本设计满足了人们对物质的需求，又提高了科学性。以适应当今品种多批量小的电子市场的需求，大大提高了产品的市场竞争力。键词：红外Abstract This design of infrared automatic washing device is a multifunctional infrared automatic washing device, different from ordinary market automatic washing device, it can be achieved not only within the framework of infrared sensors, automatic water, and can be set through the keypad IR sensing distance, not to set the distance of infrared sensors, hand-washing does not work, no water, and measured through the LCD liquid crystal display objects or hands to infrared receiver, sending heads and key set from the infrared sensing distance. Not only meet the design requirements, but also expanded features. This infrared automatic wash designed mainly by the infrared sensor device circuit, amplifier circuit, MCU, relays, pumps and power supply circuits, LCD liquid crystal display and function key component. Circuit with infrared receiver and transmitter circuit, according to YC-5000 produced by infrared reflectance sensor principle; MCU Infrared sensing distance, through the key input, MCU C-language program within the sensing distance can be set; through the relay control circuit switches, LCD display infrared sensing distance and the need to set the distance sensor, infrared sensor function keys control the distance. The system response speed, low power consumption, better sensitivity. Designed to meet the needs of people for material to facilitate peoples lives, but also improves the scientific products. To adapt to todays variety of small-volume electronic market demand, greatly enhanced the competitiveness of products in the market. Key words: Infrared sensor;infrared automatic washing device;pump; MCU目 录 引言 1 绪论 1.1 课题背景 1.2 课题的目的及意义 2 方案比较 2.1 射频放大部分 2.2