毕业设计（论文）_基于翅状热沟犁削的刀具最佳切削速度的选择研究.docVIP

摘 要 针对目前严峻的芯片热控制问题，分析了芯片散热技术的研究现状，从热管原理、热管制造、热管性能、热管应用等方面综述等方面综述了电子芯片热管散热技术的特点和发展过程，并对未来热管技术的发展趋势进行了预测。而热管技术的发展，很大程度上取决于散热技术的发展。本人这篇论文正是介绍散热片制造的一种新技术-即用散热片的翅状热沟犁削来加工散热片。 本次毕业设计（论文）的题目是：基于翅状热沟犁削的刀具最佳切削速度的选择研究。本次设计主要是对翅状热沟犁削的刀具最佳切削速度的选择研究，通过不同切削速度对翅状热沟犁削的影响情况，探索出进行翅状热沟犁削时的最佳速度。 这篇论文主要阐述用刨削成型加工这一工艺来制造散热片，工件是用专门设计的刀具进行刨削的。相比与通常的加工工艺，这种方法简单，容易，而且对加工设备要求也不高 。基于要形成连续不断的带状切削，通过控制切削流的方向与翅状切削的半径，可以成功获得直的，完整的散热片。 关键词：芯片；热管；刨削成型；散热片卷；最佳切削速度 Abstract Analyzing the research status of the chip heat releasing technology, in the current grim chip thermal control problems from the areas of the heat control theory, thermal and manufacturing, thermal management performance and thermal control applications, synthesize the electronic chips, hot heat releasing characteristics and technology development process, and forecase future thermal control technology development trend. But thermal control technology development, to a large extent, depend on heat releasing technology development. I created this piece of paper is to introduce a new heat dissipation technology - the use of heat releasing films Winged warrants hot Gap plow cut to processing heat release tablets. This graduate design (paper) entitled : Winged warrants based on the hot Gap plow cut cutlery best cutting speed options study. This design is to cut the shark fin-shaped hot Gap ploughs cutlery best choice to study cutting speed through different cutting speed of Winged warrants hot Gap plow cut the impact of a shark fin-shaped explored the best hot Gap plow cut speed. This paper uses the planing-forming process to produce fin curl,where the workpiece is planed by tools specially designed.Compared to the normal methods,this process is simple,easy and has lower equipment requirements.Based on forming a continuous strip chip,by controlling the chip’s flow direction and the curling radius, a straight intergral fin piece is obtained successfully. Key words: Chips;heat pipe;planing-forming;fin curl;the best cutting speed 目 录 1 绪