《BMW 3 Series Sedan, Wagon (E46)》.pdfVIP

Disclaimer: Bavarian Soundwerks highly recommends professional installation of the products we sell. We provide these installation instructions free of charge as a guide to assist those customers who choose to perform the installation themselves. Additionally, they may serve as a guide to assist a professional installer in order to expedite the installation of the customer’s new products. However, Bavarian Soundwerks makes no guarantee, implied or expressed, as to the accuracy or safety of these instructions. Use of these instructions constitutes a waiver of all liability including, but not limited to, damage that may occur to the reader’s, user’s, or customer’s vehicle, its components, and/or the reader, customer, or installer. Instructions for Front Midrange Installation in ‘99-‘05 BMW 3 Series Sedan, Wagon (E46) Tools Required: (All the below are readily available at your local auto parts store) • Philips Head Screwdriver • Panel Removal Tool • Torx T20 screwdriver • Small, Straight Pick Tool • Hot Glue Gun w/Glue Sticks We’ve broken down our instructions into each task so that you can take the process one step at a time and keep the project manageable! Some important notes for you to keep in mind: • If you have any questions about the procedures outlined below, please stop what you’re doing and give us a call. If we’re not available, and you’re not sure if what you’re doing is correct, put the car back together and hold off on the installation until we get everything clarified for you. Believe us, it’s worth it. ☺ • Read these instructions completely before starting! • When removing parts from your vehicle, to make reinstallation easier and simpler, we highly recommend the use of zip-lock bags with labels to organize the smaller the parts you’re removing. • **IMPORTANT: Before you make any connections, we