液压脉冲工具说明.pptVIP

* * * * IMPULSE TOOLS油压脉冲工具 普通冲击扳手 工作原理及特点： 钢球推动凸轮，推动冲击块撞击板轴。 撞击之后，弹簧使冲击块复位至起始位置，重复下一个循环。 WHAT IS AN IMPULSE TOOL 什么叫脉冲工具？ Basically,an impulse tool is composed of a hydraulic pulse unit driven by a pneumatic motor 简单地说，脉冲工具是由气马达驱动一个液压脉冲单元构成的。 液压脉冲气扳机－特点 ☆ 输出扭矩可调，调整范围可达最大扭矩的40%以上； ☆ 输出扭矩精度高，可达10%~15%之间； ☆ 冲击柔和，利于保护螺栓，适于高级作业场合； ☆ 工作噪声低，通常为80dB（A）左右； ☆ 工具使用寿命长(25万个螺栓两次维修保养之间)。 液压脉冲气扳机 选型时注意：尽可能使用户要求的设定扭矩避开两个极限值。 TECHNICAL OVERVIEW 原理概述 Housing driven by motor气马达驱动气缸旋转 Pistons活塞 Rollers滚轴 Camshaft driven by motor气马达驱动凸轮轴旋转 Spindle/Anvil转子 Increased oil pressure 被增强的油压 Patented piston roller-type unit 获得专利的活塞/滚轴结构单元 Rollers and pistons are moving radially in the anvil, camshaft driven by the motor pushes them in and out. Pistons and rollers transfer the torque directly to the anvil/spindle. 滚轴和活塞在油缸里做径向运动，凸轮轴在气马达的驱动下推动他们进出。活塞和滚轴直接向转子（输出轴）传递扭矩。 Very few moving parts immersed completely in oil ensures a smooth and durable functioning 很少的几个运动的部件完全浸入油里面确保工作平滑和持久。 TWIN PISTON IMPULSE UNIT 脉冲单元的 一对活塞 VERY FEW MOVING PARTS 少量的运动部件 Shut Off System自动断气系统 TECHNICAL OVERVIEW 原理概述 Inertia mass惯性块 Latch pin 插销 Torque adjustment screw and spring 扭矩调节螺丝和弹簧 Inertia mass惯性块 Free running自由运转 Air passes through the valve and the inertia mass rotates with the pulse unit. 压缩空气通过阀门和与脉冲单元一起旋转的惯性块。 Shut Off 自动断气 Pulse unit stops, inertia mass rotates moving the latch pin across. This allows the push rod to move forward and close the valve 脉冲单元停止，惯性块旋转移动至对面的插销使得顶杆向前移动关闭进气阀。 Shut Off System 自动断气系统 TECHNICAL OVERVIEW 原理概述 Low air pressure will increase the final torque value - tool impulses more before shut off 低气压将增加最终的输出扭矩－在自动断气之前冲击力更大。 Time Torque 扭矩 Increased number of pulses =Improved accuracy 增加脉冲数量=提高了工具精度 Influence of air pressure 气压的影响(6/5.5/5 bar) TECHNICAL OVERVIEW原理概述 Twin pistol patented HIGHER USED TIME ON LINE REDUCE MAINTENANCE Shut-off system patented BETTER ACCURACY Conclusion SILENCER消音器 All tools (shut off) are equipped with an advanced silencer that inclu