《Diffusion Bonding》.pdfVIP

TALAT Lecture 3805 Combination of Superplastic Forming and Diffusion Bonding 6 pages, 6 figures Basic Level prepared by K. Siegert and T. Werle, Institut für Umformtechnik, Universität Stuttgart Objectives: − to review briefly the principles of diffusion bonding in combination with superplastic forming of aluminium alloys Prerequisites: − General background in production engineering and material science Date of Issue: 1994 © EAA – European Aluminium Association 3805 Combination of Superplastic Forming and Diffusion Bonding Table of Contents 3805.01 Design of Hollow Bodies and SPF/DB Example 2 3805.02 Principles of the SPF/DB Processing Steps3 3805.03 Literature5 3805.04 List of Figures 6 3805.01 Design of Hollow Bodies and SPF/DB Example Using a combination of superplastic forming (SPF) and diffusion bonding (DB), it is possible to fabricate hollow bodies with a sandwich construction, with multiple ribs and V-type ribs, see Figure 3805.00.01 in a single processing sequence. Construction of Hollow Bodies Sandwich construction Multiple ribs V-type ribs alu Construction of Hollow Bodies 3805.01.01 Training in Aluminium Application Technologies As an example for this combination of SPF and DB processes Figure 3805.01.02 shows a hollow box profile with closed chambers. TALAT 3805