《Series CCP-32N》.pdfVIP

Series CCP-32N COAX SWITCHES Low PIM DC–3 GHz Latching SPDT Coaxial Switch PART NUMBER DESCRIPTION CCP-32N Commercial Latching SPDT, DC-3GHz, Low PIM These switches are designed to have extremely low passive intermodulation for use in narrow bandwidth communications applications. The CCP-32N is a SPDT, electromechanical, coaxial switch designed to switch a microwave signal from a common input to either of two outputs. The characteristic impedance is 50 Ohms and is suitable to systems from DC-3GHz. The CCP-32N series switch is offered with a latching actuator. The CCP-32N series switch is interchangeable with a variety of switches. ENVIRONMENTAL AND PHYSICAL CHARACTERISTICS ELECTRICAL CHARACTERISTICS Operating Temperature –40°C to 65°C Form Factor SPDT, break before make Vibration MIL-STD-202 Method 214, 10 g’s RMS Condition D, non-operating Frequency Range DC–3 GHz Shock MIL-STD-202 Method 213, 500 g’s Characteristic Impedance 50 Ohms Condition D, non-operating Switching Time 20 ms max. Standard Actuator Life 1,000,000 cycles Actuation Voltage Available 12 15 24 28 V Connector Type Type N Actuation Current, max. @ ambient 200 160 90 75 mA Humidity Moisture Seal Available Weight 6 oz. 170.1g max. PERFORMANCE CHARACTERISTICS PASSIVE INTERMODULATION CHARACTERISTICS Frequency DC–3 GHz Tone 1 Frequency Tone 2 Frequency IM3 Frequency PIM Threshold MHz MHz MHz dBc Insertion Loss, dB, max. 0.3 1945 1990 1900 -140.0 Isolation, dB, min. 70 VSWR , max. 1.30:1 P1 P2 dBm PIM dBc PEAK PIM dBc RF Power cw , W, max. 200 43 -148.6 -148.6 PART NUMBERING SYSTEM CCP-32 N 6 C - T ** Series Options Connectors Actuator Type Actuator Voltage Connector Actuator Voltage Actuator Type Options N: Type N Female 6: 28 Vdc Latching 0: Standard Contacts T: TTL Drivers with Diodes 7: 15 Vdc Latching C: Indicator Contacts D: Transient Suppression 8: 12 Vdc Latching D: Self Cutoff Only Diodes 9: 24 Vdc Latching E: Indicators and Self Cutoff R: Positive + Com