平面磨削中形位误差的改进型离散系统模型【大学毕业论文】.docVIP

毕业论文外文资料翻译 题 目 学 院 专 业 班 级 学 生 学 号 指导教师 二〇一二 年 月 日 Journal of Materials Processing Technology,210 2010 1794-1804 平面磨削中形位误差的改进型离散系统模型 Y.Gao1, X.Huang1, Y.Zhang1 香港科技大学机械工程系 Keywords: Surface grinding; Partial removal; In-process sensing; Precision control; Model; Form error Abstract: Grinding remains as one of few choices being able to machine very hard materials to deliver ultra high precision at high material removal rate for ef?ciency. Effective models are needed for precision control of the machining process. So far, few studies on form error prediction have been reported. Machining usually begins with partial removal of workpiece surface. Without in-process sensing, system parameters could not be accurately determined nor surface form information thus preventing us from modeling for precision control. In this study, an improved discrete system model and an in-process sensing technique have been proposed to address the partial removal and precision control problems. Models for partial removal, full removal, and sparking out conditions have been established. Form error assessment in the partial removal stage has been investigated. It is found that the grinding constant is able to re?ect changes in machining conditions and is able to represent machining capability. A larger grinding constant will mean a reduced size reduction. Further studies of the grinding constant are necessary. For the accurate estimation of the grinding constant, two approaches are proposed. The iterative approach was found more suitable and convergent. The proposed models and in-process sensing technique were validated through experimental testing in terms of workpiece surface form pro?le yn x,z0 , average size reduction cn, surface form error Epvn and normal grinding force Fnn. Through detailed examination and comparative studies, the proposed models and in-process sensing technique offered signi?cant improvements ranging from approximately 16.9% to 23%, compared with