电力系统动态等值参数聚合的实用方法.pdfVIP

30 卷 24 期 电 网 技 术 Vol. 30 No. 24 2006 年12 月 Power System Technology Dec. 2006 文章编号：1000-3673 （2006 ）24-0026-05 中图分类号：TM744 献标识码：A 学科代码：470 4054 电力系统动态等值参数聚合的实用方法 杰，余贻鑫 天津大学 电气与自动化工程学院，天津市 南开区 300072 ） A Practical Method of Parameter Aggregation for Power System Dynamic Equivalence HU Jie，YU Yi-xin （School of Electrical Engineering and Automation，Tianjin University，Nankai District，Tianj in 300072 ，China ） ABSTRACT: To reduce the calculation amount of numerical 进行仿真，并与频域法相比较，结果表明了该等值方法的有 simulation in transient stability analysis for large-scale power 效性。 grid, the grid can be simplified by dynamic equivalence. The 关键词：电力系统；动态等值；参数聚合；加权法 dynamic equivalence of power grid includes three parts: (A) dynamic recognition of coherent unit groups; (B) network 0 引言 simplification and (C) parameter aggregation of coherent unit 在电力系统规划设计和实际运行中为保证输 groups. In part (C), a weighing method based approach for 电的可靠性需做大量的暂态过程仿真计算，以估计 parameter aggregation of detailed model of coherent unit 系统遭受扰动后的稳定性。为提高输电的经济性和 groups is proposed, by which the detailed model parameters of equivalent generating set and it regulating system as well as 可靠性，现代电力系统越来越趋向于区域互联，从 that of equivalent asynchronous motor of load can be obtained. 而大大增加了数字仿真的计算量。因此有必要对大 Using the proposed approach, not only the purpose of [1] 电力系统进行动态等值 。在动态等值中，完全系 parameter aggregation can be realized, but also the calculation 统分为研究系统和外部系统，由于动态等值主要是 time is reduced. The results from ETM