基于PSCAD的双馈式风力发电系统柔性并网研究.pdfVIP

第 35 卷 第 12 期 电 网 技 术 Vol. 35 No. 12 2011 年 12 月 Power System Technology Dec. 2011 文章编号：1000-3673 （2011 ）12-0196-06 中图分类号：TM 614 ；TM 743 文献标志码：A 学科代码：470·4047 基于 PSCAD 的双馈式风力发电系统柔性并网研究 安中全，任永峰，李含善 （内蒙古工业大学，内蒙古自治区呼和浩特市 010051 ） PSCAD Based Research on Flexible Grid-Connection of DFIG Wind Power Generation System AN Zhongquan, REN Yongfeng, LI Hanshan (Inner Mongolia University of Technology, Hohhot 010051, Inner Mongolia Automous Region, China) ABSTRACT: At present the doubly-fed induction generator PSCAD/EMTDC 建立了完备的 2 MW 并网运行双馈式风力 (DFIG) becomes the most widely applied type of wind power 发电系统仿真模型，对风速突变时系统柔性并网响应特性进 generators. According to the convention of generator, a 行了细致的仿真研究。研究结果表明，建立的双馈式风电系 dynamic mathematical model of DFIG is derived, in which the 统模型控制性能和动态响应速度均较好，提出的控制策略能 inner loop control of rotor current and outer loop control of 快速地控制发电机的定子电压满足并网条件。通过风速突变 rotating speed of DFIG is implemented by internal model 工况仿真模拟可以看出，该系统实现了双馈式风电系统在变 control, and a flexible control strategy for grid-connected 风速条件下的柔性并网。仿真结果与理论分析相一致，验证 operation of DFIG based wind power generation system is put 了仿真模型的正确性。 forward. Using PSCAD/EMTDC, a complete simulation model 关键词：双馈感应电机；柔性并网；内模控制；PSCAD ； of grid-connected DFIG power generation system with capacity 风力发电；建模 of 2MW is built to perform detailed simulation research on the response characteristics of flexibly grid-connected wind power 0 引言 generation system while wind speed abruptly changes.