基于主导节点法的极限诱导分岔检测方法.pdfVIP

第34 卷 第9 期 电 网 技 术 Vol. 34 No. 9 2010 年9 月 Power System Technology Sep. 2010 文章编号：1000-3673 （2010 ）09-0048-06 中图分类号：TM 71 文献标志码：A 学科代码：470·4054 基于主导节点法的极限诱导分岔检测方法 1 2 1 2 熊宁 ，何大春 ，程浩忠 ，李琥 （1．上海交通大学 电子信息与电气工程学院，上海市 闵行区 200240 ； 2．江苏省电力公司，江苏省 南京市 210024 ） A Practical Approach to Detect Limit Induced Bifurcation Based on Key Node Method 1 2 1 2 XIONG Ning , HE Dachun , CHENG Haozhong , LI Hu (1. School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Minghang District, Shanghai 200240, China; 2. Jiangsu Electric Power Company, Nanjing 210024, Jiangsu Province, China) ABSTRACT: To accurately determine the critical point of 0 引言 voltage stability, the cause leading to limit induced bifurcation 目前静态电压稳定分析中，大多数文献都只是 is analyzed, then based on key node method an approach to detect the type of bifurcation is proposed. In the proposed 针对鞍结分岔[1]进行讨论。文献[2-3]将崩溃点处的 approach, firstly the high efficiency of key node method is 法向量作为修正方向，找出了最恶劣的负荷增长方 utilized to search the first voltage instability point in PV curve 式；文献[4]提出一种连续潮流和遗传算法相结合的 and a node set, where the PV nodes were changed into PQ 方法，获得了最大静态稳定裕度；文献[5]以故障条 nodes, between the first voltage instability point and previous 件下的负荷裕度为约束，提出了一种多预想事故静 operation point, i.e., the last one point of