干式变压器局部放电在线监测脉冲电流传感器的开发.pdfVIP

第35 卷 第2 期 电 网 技 术 Vol. 35 No. 2 2011 年2 月 Power System Technology Feb. 2011 文章编号：1000-3673 （2011 ）02-0149-05 中图分类号：TM 452 文献标志码：A 学科代码：470·4017 干式变压器局部放电在线监测 脉冲电流传感器的开发 张志东，宋建成 （太原理工大学电气与动力工程学院，山西省 太原市 030024 ） Development of Pulse Current Sensor for On-Line Monitoring of Partial Discharge in Dry-Type Transformer ZHANG Zhidong, SONG Jiancheng (College of Electrical and Power Engineering, Taiyuan University of Technology, Taiyuan 030024, Shanxi Province, China) ABSTRACT: Based on the transfer function corresponding to 局部放电；频率特性 equivalent circuit model of self-integral Rogowski coil and by 0 引言 use of Matlab platform, the influences of parameters such as mean diameter of ring iron core, diameter of circular 局部放电作为干式变压器故障发生的重要征 cross-section of iron core, coil turns as well as load resistance 兆，是评价其绝缘劣化程度的主要特征参数，对局 and stray capacity on frequency characteristic and sensitivity of 部放电进行在线监测，可以及时发现变压器中潜伏 pulse current sensor for partial discharge monitoring are 的绝缘故障，从而预防突发性事故的发生[1-5] 。为了 analyzed. According on-site practice, a criterion for the selection of parameters, which offers theoretical foundation for the design 有效、准确地拾取微弱的高频放电信号，传感器必 and manufacturing of pulse current sensor, is put forward. Based 须具有足够宽的工作频带、较好的瞬态响应、较高 on the proposed criterion a pulse current sensor for the on-line 的灵敏度、稳定度和线性度[6] 。因此，局部放电脉 monitoring of partial discharge in dry-type transformer is 冲电流传感器的设计是关键的环节，直接影响整个 developed and corresponding e