700V外延LDMOS模型的建立与参数提取.docVIP

  • 4
  • 0
  • 约4.1千字
  • 约 5页
  • 2016-03-03 发布于重庆
  • 举报
700V外延LDMOS模型的建立与参数提取.doc

700V外延LDMOS模型的建立与参数提取 摘要:本文借助二维数值模拟软件MEDICI对700V外延型LDMOS特性进行分析,对其电流饱和机理做了研究,在此基础上采用宏模型的建模方法,给出LDMOS的等效电路模型。并用参数提取软件Aurora,提取了相应得参数。在Cadence下仿真取得了较好的效果。 关键词:LDMOS,饱和栅压,等效电路模型 Building model and Extracting parameters of a 700V extension LDMOS Device Abstract: Analyses are made on the 700V extension LDMOS Device by using two-dimensional numerical simulator MEDICI and investing its saturation mechanisms of current. Basing on these facts, we use a sub-circuit model by the concept of macro model. And we extract parameters of it by using parameter extraction software Aurora. Good results are obtained

文档评论(0)

1亿VIP精品文档

相关文档