WAMS_SCADA混合测量状态估计数据兼容性分析.pdfVIP

第 30 卷 第 16 期 中 国 电 机 工 程 学 报 Vol.30 No.16 Jun.5, 2010 60 2010 年 6 月 5 日 Proceedings of the CSEE ©2010 Chin.Soc.for Elec.Eng. 0258-8013 (2010) 16-0060-07 TM 744 A 470 40 文章编号： 中图分类号： 文献标志码： 学科分类号： ⋅ WAMS/SCADA 混合测量状态估计数据兼容性分析 李大路，李蕊，孙元章 (武汉大学电气工程学院，湖北省 武汉市 430072) Data Compatibility Analysis of WAMS/SCADA Hybrid Measurements State Estimation LI Da-lu, LI Rui, SUN Yuan-zhang (School of Electrical Engineering, Wuhan University, Wuhan 430072, Hubei Province, China) ABSTRACT: Aiming at the problem that more and more 关键词：相量测量单元；广域测量系统；电力系统；状态估 studies used hybrid data of wide area measurement system 计；混合测量；兼容 (WAMS) and supervisory control and data acquisition 0 引言 (SCADA) to improve the traditional state estimation, a new method to solve the compatibility problem of WAMS/SCADA 由 广 域 测 量 系 统(wide area measurement hybrid data was proposed. Firstly, the differences between system，WAMS)和监控及数据采集系统(supervisory WAMS and SCADA are analyzed, and through the built control and data acquisition，SCADA)组成的混合测 WAMS/SCADA hybrid data model, we can conclude that time 量状态估计是改善以单一 SCADA 为测量的传统电 synchronization and measure weights are the main factors 力系统状态估计的有效手段。由于 SCADA 和 which affect the compatibility of hybrid data. Therefore, data WAMS 采用的是不同的技术平台，2 种测量数据存 dependence analysis is used to implement the synchronization of WAMS and SCADA data, and to re-quantify the measure 在很多差异，不经过处理即将二者结合为混合测量 weights