交直流三自由度混合磁轴承结构与有限分析.pdfVIP

27 卷 12 期 中 国 电 机 工 程 学 报 Vol.27 No.12 Apr. 2007 2007 年4 月 Proceedings of the CSEE 2007 Chin.Soc.for Elec.Eng. 文章编号：0258-8013 (2007) 12-0077-05 中图分类号：TM 133 文献标识码：A 学科分类号：47040 交直流三自由度混合磁轴承结构与有限分析 熀秋，张 仲，诸德宏，王德明，谢志意 (江苏大学电气信息工程学院，江苏省 镇江市 212013) Structure and Finite Element Analysis of An AC-DC Three Degrees of Freedom Hybrid Magnetic Bearing ZHU Huang-qiu, ZHANG Zhong, ZHU De-hong, Wang De-ming, XIE Zhi-yi (School of Electrical and Information Engineering, Jiangsu University, Zhenji ang 212013, Jiangsu Province, China) ABSTRACT: To simplify the mechanical structure, decrease 路进行了推算，导出了其轴向、径向磁力数学模型，设计了 the overall system size of the 3 degrees of freedom axial-radial 实验样机，并对实验样机的磁路用ANSYS 8.1 软件进行了 magnetic bearing and reduce the manufacturing costs as well as 有限元分析。理论研究和有限元分析表明：交直流三自由度 operating costs, an innovated AC-DC 3 degrees of freedom 混合磁轴承结构合理紧凑、承载力大、效率高、成本低。 hybrid magnetic bearing(AC-DC-3DOF-HMB) is proposed, 关键词：混合磁轴承；等效磁路；悬浮力；数学模型；有限 which is driven by a DC amplifier in axial direction and a 元分析 3-phase power converter in radial directions respectively, and 0 引言 the axial and radial bias magnetic fluxes are provided with a common radial polarized permanent magnet ring. The structure 磁轴承具有无摩擦，无磨损，不需润滑及密封，高 and principle producing magnetic suspension forces are 速度，高精度及寿命长等优点，从根本上改变传统 introduced. The flux path is calculated by using equivalent 的支承形式。磁轴承按其约束功能可分为轴向单自 magnetic circuit; the mathematical models of the magnetic