喷动流化床最小喷动流化速度智能拟合.pdfVIP

第30 卷 第17 期 中 国 电 机 工 程 学 报 Vol.30 No.17 Jun.15, 2010 2010 年6 月15 日 Proceedings of the CSEE ©2010 Chin.Soc.for Elec.Eng. 17 0258-8013 (2010) 17-0017-05 TQ 051 A 470 20 文章编号： 中图分类号： 文献标志码： 学科分类号： ⋅ 喷动流化床最小喷动流化速度智能拟合 1 1 1 2 王春华 ，仲兆平 ，李睿 ，鄂加强 (1．东南大学能源与环境学院，江苏省 南京市 211189 ； 2．湖南大学机械与运载工程学院，湖南省 长沙市 410082) Intelligent Fitting of Minimum Spout-fluidized Velocity in Spout-fluidized Bed 1 1 1 2 WANG Chun-hua , ZHONG Zhao-ping , LI Rui , E Jia-qiang (1.School of Energy and Environment, Southeast University, Nanjing 211189, Jiangsu Province, China; 2. School of Mechanical and Automotive Engineering, Hunan University, Changsha 410082, Hunan Province, China) ABSTRACT: Minimum spout-fluidizing velocity measuring 0 引言 experiments were carried on in 3-dimensional spout-fluidized 喷动流化床在喷动床基础上引入了流化风，增 bed. Relation among minimum spout-fluidized velocity and other working parameters in spout-fluidized bed such as static 大了气固接触时间，降低了结块发生的概率。因为 bed height, particle size, particle density, nozzle diameter, gas 这些优点，喷动流化床目前已被广泛地应用于干 flow velocity were analyzed. Based on the experiments, least 燥、造粒、涂层等颗粒物料加工与石油裂解，煤气 square support vector machine was used to predict the 化及燃烧等诸多反应过程。 minimum spout-fluidized velocity, and adaptive genetic 最小喷动流化速度是喷动流化床设计和操作 algorithm was applied to optimize the parameters of least 的基本参数之一，国内外许多研究者对喷动流化床 square support vector machine.