Z形狭缝内两种工质沸腾汽液两相特性分析.pdfVIP

第31 卷 第14 期 中 国 电 机 工 程 学 报 Vol.31 No.14 May 15, 2011 2011 年5 月15 日 Proceedings of the CSEE ©2011 Chin.Soc.for Elec.Eng. 71 0258-8013 (2011) 14-0071-06 TK 124 A 470 10 文章编号： 中图分类号： 文献标志码： 学科分类号： ⋅ Z 形狭缝内两种工质沸腾汽液两相特性分析 郭雷，张树生，程林 ( 山东大学热科学与工程研究中心，山东省 济南市 2500611) Study on Gas-liquid Two-phase Flow Characteristics of Two Kinds of Media in Z-shaped Channels GUO Lei, ZHANG Shusheng, CHENG Lin (Institute of Thermal Science Technology of Shandong University, Jinan 250061, Shandong Province, China) ABSTRACT: To explore the boiling heat transfer mechanism 离直径较小，汽泡脱离频率高；表面张力和液体黏性对流动 in narrow channels, gas-liquid two-phase flow in z-shaped 沸腾系统压降都具有较大影响；液体比热和沸点的不同导致 narrow channels was studied with two different types of media. 换热系数有较大差别；结果与实验数据吻合良好，均表明水 The bubble generation, growth and departure processes were 沸腾换热系数高于乙醇，Z 形通道强化换热效果明显。 analyzed using numerical simulation and self-programming. 关键词：换热机制；Z 形狭缝；核态沸腾；汽泡动力学 The influence of interface movements and changes on internal pressure difference and average surface heat transfer coefficient 0 引言 was investigated by using geometry reconstruction and [1] Klausner 等 对水平壁面上液体流动沸腾状况 interface tracking, taking into account gravity, surface tension 下的汽泡动力学进行研究，采用高速摄像技术进行 and viscosity during calculation. The results show that the 汽泡参数的测量，建立了汽泡受力模型。Ishlbashi viscosity has great influence on